What is a UV Sanitizer?
A UV sanitizer is a device that uses ultraviolet light, specifically UV-C wavelengths, to kill or inactivate microorganisms on surfaces or in the air. In order to be effective, the UV-C light must be able to reach the microorganisms. Therefore, UV sanitization is not effective in killing microbes in the interior of solid objects, in the depths of turbid liquids, or on the underside surfaces of objects which light cannot reach. Furthermore, while sterilization (i.e. the killing or deactivation of all life on an object) is theoretically possible with UV-C, in practice the UV sanitizer in the Wet Lab Makerspace can only be expected to disinfect (i.e. kill or deactivate some but not all microorganisms).
What UV Sanitizer is available in the Wet Lab Makerspace?
In the Wet Lab Makerspace, we have a UV Sanitizer located in the Open Lab on Bench 19.

Parts of UV Sanitizer


- Viewing Lens: A small window to visually inspect the interior of the cabinet without exposing yourself to UV radiation. Ensures that the UV light is functioning without the need to open the cabinet.
- Control Panel: Includes buttons to set the operation time and manage settings. Features a digital display to show the countdown timer or operational status.
- Interior Shelves: Designed with wire racks to maximize exposure of items to UV light for uniform sanitization.
- UV Lamp : The source of ultraviolet light that kills or inactivates microorganisms by disrupting their DNA and RNA. Never look directly at the UV light to avoid harmful effects.
- Door and Handle: A secure door with a handle ensures the UV light stays contained while in operation. Opening the door automatically disables the UV lamp for safety.
Safety Considerations
- Minimum PPE in the Open Lab: lab coat, safety glasses, gloves
- Additional PPE may be required, depending on your material
- Eye Damage : Direct exposure to UV light can cause photokeratitis or corneal damage, leading to pain and vision problems – NEVER look directly into the UV light
- Skin Burns : Prolonged exposure can result in erythema (sunburn) or long-term skin damage.
- Material Degradation : Prolonged UV exposure can degrade plastic, rubber, and certain other materials.
Important Note !!!
Only the surfaces directly exposed to UV light are sanitized. Any surfaces that are shaded, covered, or not in the direct path of the UV rays will not receive effective sanitization. This means:
-
- Hidden Areas: Items with intricate designs or overlapping parts (e.g., folded fabric or stacked objects) may have unsanitized regions.
- Undersides: Surfaces underneath the items, or areas blocked by other objects, will not be sanitized.
Recommendation:
- Arrange items on the shelves with sufficient spacing.
- Avoid stacking or overlapping items to maximize exposure.
- If necessary, rotate the items and repeat the sanitization process.
Operating Instructions
1. Prepare Items for sanitization
Place items on the shelves with some spacing for uniform exposure to UV light. Avoid stacking or overloading the cabinet.
2. Close the Door
Ensure the door is securely closed. The cabinet’s safety mechanism will prevent UV operation if the door is not shut properly.
3. Set Timer
Use the control panel to set the desired sanitization time based on the manufacturer’s recommendation (e.g. 15 minutes).
4. Start the Sanitization Process
Press the start button. The UV lamp will activate, and the timer will count down.
5. Observe Through the Viewing Lens
If needed, inspect the sanitization process via the lens without opening the cabinet.
6. Wait for Completion
The sanitizer will turn off automatically after the set time. Open the door and remove the items safely.